Tire Sealer & Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire. tyre sealant and inflator aerosol
1. If possible remove object causing puncture. 2. Deflate the tyre; Shake the can well before use; 3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm. 4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
1. Avoid contact with eyes.
2. Keep away from heat, flame, spark and other source of ignition.
3. Store in a cool, dry place (45°C); Avoid direct sunlight.