Tire Sealer & Inflator is designed to quickly seek out and effectively seal most normal punctures and slow leaks. It is 100%applicable to breach within 6 m on tubeless rubber tyres of cars, motorcycles and electrical bicycles.
1. Don’t remove the hard from tire which arise tire leakage, shake well before using
2. Open the cap, connect the tube with the wheel valve. (some tire shall remove the hub cap, if has valve cap, remove it)
3. The material shall be held in high position, press the can’s button to press the material into the tire till the tire seal above the horizon (ensure the tire has 1.5kg-2kg pressure), don’t press too much, don’t add oxygen.
4. Loosen the button, get off the tube from the valve, drive the auto/bike for about 1-2km, let the liquid distributing evenly inside the tire to form a protective film.
5. The material is for temporary repairing, the auto/bike shall drive to service shops for further repair or tire-replacing.
1. Avoid contact with eyes.
2. Keep away from heat, flame, spark and other source of ignition.
3. Store in a cool, dry place (45°C); Avoid direct sunlight.